CMP E1FX | Explosive Atmosphere Cable Gland

• Metal-to-metal armour clamping
• Direct & remote installation
• Displacement type flameproof inner seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening

• Designed to prevent Coldflow, see CMP Technical Document TS001 (available upon request)
• -60°C to +130°C
• Class I Zone 1, 21 and Zone 2, 22 Class I Division 2 ABCD
• Globally marked, IECEx, ATEX & cCSAus
• Superior EMC performance

 

Note: † Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

 

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over.

 

Display more Display less
Product Features
Table Data
Downloads
Recommended Products
  • Design Specification
    BS 6121:Part 1:1989, IEC 62444, EN 62444
  • Mechanical Classification*
    Impact = Level 8, Retention = Class B
  • Ingress Protection Rating **
    IP66 as standard (IP67, IP68 available upon request)
  • Cable Type
    Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Wire Braid Armour (e.g. SWB), Aluminium Strip Armour (ASA), Armoured & Jacketed
  • Material
    Brass, Electroless Nickel Plated Brass, Aluminium
  • Seal Material
    CMP SOLO LSF Halogen Free Thermoset Elastomer
  • Armour Clamping
    Detachable Armour Cone & AnyWay Universal Clamping Ring
  • Sealing Area(s)
    Cable Inner Bedding & Outer Cable Sheath

Cable

Gland

Size

Available Entry

Threads

'C'

Cable
Bedding
Diameter
'A'
Overall
Cable
Diameter
'B'

Armour Range †

Grooved Cone

(X)

Across
Flats
'D'
Across
Corners
'D'
Protrusion
Length 'F'

Combined Ordering

Reference

(*Brass Metric)

ShroudCable
Gland
Weight
(Kgs)
StandardOption
Metric

Thread

Length

(Metric)

'E'

NPT

Thread

Length

(NPT)

'E'

NPTMinMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20S16M2015.0½'19.9¾"3.18.66.113.10.31.024.026.472.520S16E1FX1RAPVC040.16
20SM2015.0½'19.9¾"6.111.69.515.90.31.024.026.470.020SE1FX1RAPVC040.15
20M2015.0½'19.9¾"6.513.912.520.90.41.030.533.673.020E1FX1RAPVC060.21
25SM2515.0¾'20.21"11.119.914.022.00.41.237.541.389.025SE1FX1RAPVC090.33
25M2515.0¾'20.21"11.119.918.226.20.41.237.541.389.025E1FX1RAPVC090.33
32M3215.01'25.01 ¼"17.026.223.733.90.41.246.050.686.032E1FX1RAPVC110.43
40M4015.01 ¼'25.61 ½"22.032.127.940.40.41.655.060.590.040E1FX1RAPVC150.62
50SM5015.01 ½'26.12"29.538.135.246.70.41.660.066.091.050SE1FX1RAPVC180.75
50M5015.02'26.92 ½"35.644.040.453.00.61.670.177.195.050E1FX1RAPVC210.95
63SM6315.02'26.92 ½"40.149.945.659.40.61.675.082.5102.063SE1FX1RAPVC231.34
63M6315.02 ½'39.93"47.255.954.665.80.61.680.088.0104.063E1FX1RAPVC251.34
75SM7515.02 ½'39.93"52.861.959.072.00.61.690.099.0115.075SE1FX1RAPVC282.11
75M7515.03'41.53 ½"59.167.966.778.40.61.6100.0110.0117.075E1FX1RAPVC302.42
90M9024.03 ½'42.84"66.678.676.290.30.81.6114.3125.4147.090E1FX1RAPVC324.21
100M10024.03 ½'42.84"76.090.986.1101.40.81.6123.0135.3140.0100E1FX1RALSF334.45
115M11524.04"44.05"86.097.9101.5110.20.81.6133.4146.7162.0115E1FX1RALSF346.19
130M13024.05"46.8-97.0114.9110.2123.20.81.6152.4167.6174.0130E1FX1RALSF358.34
Dimensions displayed in millimeters unless otherwise stated
Data Sheets