CMP Serrated Washers
CMP Serrated Washers

CMP Serrated Washers

Available in Stainless Steel, these ‘shake-proof’ Serrated Washers are fitted internally to the equipment before a locknut and act as an anti-vibration device to prevent the Cable Gland or accessory from inadvertently loosening in service.

 

Self-loosening should be avoided according to clause 6.4.1 of IEC 60079-14, this can occur through relative motion over time even without vibration, due to differential thermal effects caused as a result of either differences in temperature or differences in clamped materials.

 

Display more Display less
Table Data
Downloads

Metric Ordering

Reference

 Reference Diameter "A'" Minimum Thickness External Diameter "B'"

NPT

Ordering Reference 

 Reference Diameter '"A"'

Minimum

Thickness

 External Diameter '"B'"
16SW4 M16 3.9 25.5 050NPTSW4 1/2"' NPT 3.9 32.5
20SW4 M20 3.9 32.5 075NPTSW4 3/4'" NPT 3.9 40.0
25SW4 M25 3.9 40.0 100NPTSW4 1"' NPT 3.9 43.5
32SW4 M32 3.9 43.5 125NPTSW4 1 1/4"' NPT 3.9 64.5
40SW4 M40 3.9 64.5 150NPTSW4 1 1/2'" NPT 3.9 80.0
50SW4 M50 3.9 80.0 200NPTSW4 2"' NPT 3.9 100.0
63SW4 M63 3.9 100.0 250NPTSW4 2 1/2"' NPT 3.9 112.0
75SW4 M75 4.1 112.0 300NPTSW4 3"' NPT 4.1 135.0
90SW4 M90 4.1 135.0 350NPTSW4 3 1/2"' NPT 4.1 145.0
100SW4 M100 4.1 145.0 - - - -
Data Sheets
Serrated Washers