Sphinx (SCAL)
Sphinx (SCAL)

Sphinx (SCAL)

The SPHINX cable support cleat has been designed, constructed and tested in accordance with the international standard IEC 61914:2015 cable cleats for electrical installations; to ensure the securing and retention of cables, without sustaining damage to the cable(s).

Designed to support cables in high voltage applications, the SPHINX allows cable sag between fixed anchor points, where desirable. Sagging cable between fixed anchor points is a method of installation where the cable is allowed to hang between the cleats.

This area of excess cable will accommodate thermal expansion and contraction of the cable in service, without putting undue stress on the anchor
points.

The SPHINX adds additional support to the cable at the anchor points, ensuring there is no excessive pressure or point loading to the cable in these critical areas. The system is designed so that the support arm and cleat area can swivel and rotate, allowing flexibility to the installer.

The SPHINX comes in three lengths; 400mm, 600mm and 800mm. This will accommodate larger cable cleat fixing centers, whilst reducing the pressure applied t the cable from its own weight.

The product can be fabricated to suit any installation parameters. Please contact CMP to discuss your specific project requirements

Показать больше Показать меньше
Табличные данные
SPHINX Part No. Cable ø range take (mm)* Length (mm) Dimensions (mm) base fixing ø Weight (g)
H W L L2 W2 P
SCAL-100110-400 100-110 400 300 302 400 90 197 120 2 x M16 6197
SCAL-100110-600 100-110 600 300 302 600 90 197 120 2 x M16 8074
SCAL-100110-800 100-110 800 300 302 800 90 197 120 2 x M16 9923
SCAL-110120-400 110-120 400 320 324 400 90 207 120 2 x M16 6424
SCAL-110120-600 110-120 600 320 324 600 90 207 120 2 x M16 8346
SCAL-110120-800 110-120 800 320 324 800 90 207 120 2 x M16 10248