CMP Sovereign (HDSS)
CMP Sovereign (HDSS)

CMP Sovereign (HDSS)

The Sovereign cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard IEC 61914: Cable cleats for electrical installations. The Sovereign cable cleat has been designed and tested for high short circuit conditions on cables held in trefoil application / formation, to ensure the securing and retention of cables without damage.
The range is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments. The Sovereign cable cleat is available for trefoil application/ formation for diameters of 17mm to 128mm in 24 sizes.

The cleat has one M12 and two M10 fixing clearance holes within its base, allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.

Liners come as standard which help to restrain the cable(s) within vertical applications. Where thermal elongation of cables occurs, the liner also provides a layer of protection between the cable sheath and the cable cleat during normal operation. This additional layer protects the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke and Fume Zero Halogen (LSF0H) and Phosphorus-Free.

Display more Display less
Product Features
Table Data
Downloads
Recommended Products
  • Categories
    Cable Cleats
  • Design Specification
    IEC 61914
  • Cable Type
    6.1.3 Composite HDSS - Heavy Duty Stainless Steel
  • Material
    316L Stainless Steel with Standard Liner Standard liners are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
  • Needle Flame Test
    Pass - 120 second flame application time IEC 61914 clause 10.0, 10.1, IEC 60695-11-5
  • Impact Resistance
    Pass - Very heavy IEC 61914 clause 6.3, 6.3.5, 9.2
Sovereign Part No. Cable Ø Range Take (mm) Dimensions (mm) Weight (g)
W H D P Fixing Hole Ø
D1 D2
HDSS017021 17 - 21 99 88 54 25 2 x M10 1 x M12 406
HDSS019023 19-23 100 87 54 25 2 x M10 1 x M12 417
HDSS023028 23-28 104 88 54 25 2 x M10 1 x M12 450
HDSS027032 27-32 106 97 54 25 2 x M10 1 x M12 465
HDSS030035 30-35 108 103 54 25 2 x M10 1 x M12 473
HDSS033038 33-38 110 107 54 25 2 x M10 1 x M12 485
HDSS036042 36-42 132 108 54 50 2 x M10 1 x M12 570
HDSS040046 40-46 134 113 54 50 2 x M10 1 x M12 581
HDSS044050 44-50 136 121 54 50 2 x M10 1 x M12 594
HDSS048055 48-55 138 127 54 50 2 x M10 1 x M12 616
HDSS051058 51-58 140 130 54 50 2 x M10 1 x M12 627
HDSS055062 55-62 157 138 54 75 2 x M10 1 x M12 704
HDSS059066 59-66 157 145 54 75 2 x M10 1 x M12 718
HDSS063070 63-70 160 152 54 75 2 x M10 1 x M12 733
HDSS067074 67-74 163 160 54 75 2 x M10 1 x M12 748
HDSS071078 71-78 168 167 54 75 2 x M10 1 x M12 764
HDSS074082 74-82 190 175 54 75 2 x M10 1 x M12 863
HDSS077085 77-85 192 180 54 75 2 x M10 1 x M12 873
HDSS082088 82-88 193 186 54 75 2 x M10 1 x M12 883
HDSS088096 88-96 202 201 54 75 2 x M10 1 x M12 914
HDSS096103 96-103 214 215 54 75 2 x M10 1 x M12 942
HDSS103111 103-111 237 229 54 75 2 x M10 1 x M12 1055
HDSS111119 111-119 248 244 54 75 2 x M10 1 x M12 1086
HDSS119128 119-128 265 260 54 75 2 x M10 1 x M12 1122

Data Sheets
HDSS
CMP Saturn Quad (QSDSS)
CMP Saturn Quad (QSDSS)

The Saturn quad cable cleats are metallic cable cleats which have been designed, constructed,...

CMP Sapphire (SHDSS)
CMP Sapphire (SHDSS)

The SHDSS cable cleat range consists of metallic cable cleats which have been designed,...

CMP Huron (LDAL)
CMP Huron (LDAL)

THE Huron cable cleats are metallic cable cleats which have been designed, constructed, ...