Triton CDS (T3CDS) |Explosive Atmosphere Cable Gland

Globally Approved, Explosive Atmosphere Cable Gland

• Fully sequential, three step installation procedure
• Reduces installation times, cost & risk
• Direct & remote installation
• Unique compensating displacement seal system (CDS)
– Metal-to-metal installation every time regardless of cable diameter
• Designed to prevent Coldflow, see CMP Technical Document TS002 (available upon request)
• Integral protected deluge seal

• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60°C to +130°C
• Globally marked, IECEx, ATEX, UL & cCSAus
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below.

Показать больше Показать меньше
Характеристики
Загрузки
Рекомендуемые товары
  • Категория
    Кабельный скобы
  • Design Specification
    BS 6121:Part 1:1989, IEC 62444, EN 62444
  • Mechanical Classification*
    Impact = Level 8, Retention = Class D
  • Ingress Protection Rating **
    IP66, IP67 & IP68
  • Cable Type
    Single Wire Armour (SWA), Aluminium Wire Armour (AWA)
  • Материал
    Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
  • Seal Material
    CMP SOLO LSF Halogen Free Thermoset Elastomer
  • Armour Clamping
    Reversible Armour Cone & AnyWay Universal Clamping Ring
  • Sealing Area(s)
    Cable Inner Bedding & Outer Cable Sheath
product_files_1