CMP Triton CDS | Explosive Atmosphere Cable Gland

• Fully sequential, three step installation procedure, reduces installation times, cost & risk
• Direct & remote installation
• Unique compensating displacement seal system (CDS)
– Metal-to-metal installation every time regardless of cable diameter
• Designed to prevent Coldflow, see CMP Technical Document TS002 (available upon request)
• Integral protected deluge seal

• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60°C to +130°C
• Globally marked, IECEx, ATEX, UL & cCSAus
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below.

Optional Accessories : Locknuts, Earth Tags, Serrated Washers, Entry Thread Sealing Washers, Ingress Discs.

Display more Display less

Product Features

Table Data

Downloads

Recommended Products

Categories

Cable Glands
Design Specification

BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classification*

Impact = Level 8, Retention = Class D
Ingress Protection Rating **

IP66, IP67 & IP68
Cable Type

Single Wire Armour (SWA), Aluminium Wire Armour (AWA)
Material

Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
Seal Material

CMP SOLO LSF Halogen Free Thermoset Elastomer
Armour Clamping

Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Area(s)

Cable Inner Bedding & Outer Cable Sheath

Cable Gland Size	Available Entry Threads 'C'					Cable Bedding Diameter 'A'		Overall Cable Diameter 'B'		Armour Range				Combined Ordering Reference (*Brass Metric)			Shroud
	Standard				Option	Cable Bedding Diameter 'A'		Overall Cable Diameter 'B'		Grooved Cone (X)		Stepped Cone (W)		Combined Ordering Reference (*Brass Metric)
	Metric	Thread Length (Metric) 'E'	NPT	Thread Length (NPT) 'E'	NPT	Min	Max	Min	Max	Min	Max	Min	Max	Size	Type	Ordering Suffix
16	M16	15.0	-	-	-	3.1	8.6	6.1	13.1	0.3	1.0	0.8	1.25	16	T3CDS	1RA	PVC36
20S16	M20	15.0	½"	19.9	¾"	3.1	8.6	6.1	13.1	0.3	1.0	0.8	1.25	20S16	T3CDS	1RA	PVC36
20S	M20	15.0	½"	19.9	¾"	6.1	11.6	9.5	15.9	0.3	1.0	0.8	1.25	20S	T3CDS	1RA	PVC36
20	M20	15.0	½"	19.9	¾"	6.5	13.9	12.5	20.9	0.4	1.0	0.8	1.25	20	T3CDS	1RA	PVC06
25S	M25	15.0	¾"	20.2	1"	11.1	19.9	14.0	22.0	0.4	1.2	1.25	1.6	25S	T3CDS	1RA	PVC09
25	M25	15.0	¾"	20.2	1"	11.1	19.9	18.2	26.2	0.4	1.2	1.25	1.6	25	T3CDS	1RA	PVC09
32	M32	15.0	1"	25.0	1 ¼"	17.0	26.2	23.7	33.9	0.4	1.2	1.6	2.0	32	T3CDS	1RA	PVC11
40	M40	15.0	1 ¼"	25.6	1 ½"	22.0	32.1	27.9	40.4	0.4	1.6	1.6	2.0	40	T3CDS	1RA	PVC15
50S	M50	15.0	1 ½"	26.1	2"	29.5	38.1	35.2	46.7	0.4	1.6	2.0	2.5	50S	T3CDS	1RA	PVC18
50	M50	15.0	2"	26.9	2 ½"	35.6	44.0	40.4	53.0	0.6	1.6	2.0	2.5	50	T3CDS	1RA	PVC21
63S	M63	15.0	2"	26.9	2 ½"	40.1	49.9	45.6	59.4	0.6	1.6	2.0	2.5	63S	T3CDS	1RA	PVC23
63	M63	15.0	2 ½"	39.9	3"	47.2	55.9	54.6	65.8	0.6	1.6	2.0	2.5	63	T3CDS	1RA	PVC25
75S	M75	15.0	2 ½"	39.9	3"	52.8	61.9	59.0	72.0	0.6	1.6	2.0	2.5	75S	T3CDS	1RA	PVC28
75	M75	15.0	3"	41.5	3 ½"	59.1	67.9	66.7	78.4	0.6	1.6	2.5	3.0	75	T3CDS	1RA	PVC30
90	M90	24.0	3 ½"	42.8	4"	66.6	78.6	76.2	90.3	0.8	1.6	3.15	4.0	90	T3CDS	1RA	PVC32
100	M100	24.0	3 ½"	42.8	4"	76.0	90.9	86.1	101.4	0.8	1.6	3.15	4.0	100	T3CDS	1RA	LSF33
115	M115	24.0	4"	44.0	5"	86.0	97.9	101.5	110.2	0.8	1.6	3.15	4.0	115	T3CDS	1RA	LSF34
130	M130	24.0	5"	46.8	-	97.0	114.9	110.2	123.2	0.8	1.6	3.15	4.0	130	T3CDS	1RA	LSF35