CMP Patriot (SDSS)
CMP Patriot (SDSS)

CMP Patriot (SDSS)

The Patriot cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard IEC 61914: Cable cleats for electrical installations to ensure the securing and retention of cables, without sustaining damage to the cable.

 

The range is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments. The Patriot cable cleats are available for trefoil application / formation for diameters of 17mm to 128mm in 24 sizes.

 

The cleat has three M10 fixing clearance holes within one base allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The hinge opens fully allowing the cables to be easily placed within the cable cleat to aid the installer before closing and securing via the mouth piece bolt.

 

Liners come as standard which help to restrain the cable(s) within vertical applications. Where thermal elongation of cables occurs, the liner also provides a layer of protection between the cable sheath and the cable cleat during normal operation. This additional layer protects the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free.

 

Features

  • Third party certification to IEC 61914

  • 316L stainless steel

  • 17 – 128mm in 24 sizes for trefoil formation / application

  • Short circuit rating of 135kA peak fault

  • Operating temperature -60°C to +60°C

  • Combined single (M10) or two bolt (M10) fixing design

Display more Display less
Product Features
Table Data
Downloads
Recommended Products
  • Categories
    Cable Cleats
  • Design Specification
    IEC 61914
  • Cable Type
    6.1.3 Composite SDSS - Standard Duty Stainless Steel
  • Material
    316L Stainless Steel with Standard Liners Standard liners are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
  • Needle Flame Test
    Pass - 120 second flame application time IEC 61914 clause 10.0, 10.1, IEC 60695-11-5
  • Impact Resistance
    Pass - Very heavy IEC 61914 clause 6.3, 6.3.5, 9.2
Patriot Part No. Cable Ø Range Take (mm) Dimensions (mm) Weight (g)
W H D P Fixing Hole Ø
D1 D2
SDSS017021 17-21 100 76 54 25 2 x M10 1 x M10 326
SDSS019024 19-24 99 81 54 25 2 x M10 1 x M10 331
SDSS023028 23-28 101 86 54 25 2 x M10 1 x M10 340
SDSS027032 27-32 104 91 54 25 2 x M10 1 x M10 353
SDSS030035 30-35 106 94 54 25 2 x M10 1 x M10 362
SDSS033038 33-38 108 98 54 25 2 x M10 1 x M10 374
SDSS036042 36-42 127 102 54 50 2 x M10 1 x M10 441
SDSS040046 40-46 130 107 54 50 2 x M10 1 x M10 453
SDSS044050 44-50 134 115 54 50 2 x M10 1 x M10 466
SDSS048055 48-55 137 124 54. 50 2 x M10 1 x M10 483
SDSS051058 51-58 140 130 54 50 2 x M10 1 x M10 495
SDSS055062 55-62 160 137 54 75 2 x M10 1 x M10 549
SDSS059066 59-66 160 144 54 75 2 x M10 1 x M10 565
SDSS063070 63-70 161 152 54 75 2 x M10 1 x M10 580
SDSS067074 67-74 164 159 54 75 2 x M10 1 x M10 594
SDSS071078 71-78 167 167 54 75 2 x M10 1 x M10 607
SDSS074082 74-82 190 174 54 75 2 x M10 1 x M10 683
SDSS077085 77-85 193 180 54 75 2 x M10 1 x M10 688
SDSS082088 82-88 194 185 54 75 2 x M10 1 x M10 699
SDSS088096 88-96 202 200 54 75 2 x M10 1 x M10 728
SDSS096103 96-103 215 214 54 75 2 x M10 1 x M10 756
SDSS103111 103-111 235 228 54 75 2 x M10 1 x M10 846
SDSS111119 111-119 249 243 54 75 2 x M10 1 x M10 874
SDSS119128 119-128 266 260 54 75 2 x M10 1 x M10 909
Data Sheets
SDSS
CMP Cyclone I (LDSTR)
CMP Cyclone I (LDSTR)

The Cyclone I Strap cable cleat is a metallic cable cleat consisting of a fabricated...

CMP Venus Quad Cable Cleat (QPSS)
CMP Venus Quad Cable Cleat (QPSS)

The Venus Quad Cable Cleat (QPSS) are metallic cable cleats which have been designed,...

CMP Sapphire (SHDSS)
CMP Sapphire (SHDSS)

The SHDSS cable cleat range consists of metallic cable cleats which have been designed,...

CMP Sovereign (HDSS)
CMP Sovereign (HDSS)

The Sovereign cable cleats are metallic cable cleats which have been designed, constructed,...